How to Read SIM Card (5 Steps)

You can regain contacts, recover erased text messages, and fix your phone’s memory with a SIM card reader. Most activities performed on your cell phone are stored on your Subscriber Identity Module called SIM card. Each phone has a SIM card slot because it stores the subscriber code that identifies the mobile user. Instantly you buy a SIM card reader, and you can insert your SIM into the phone and plug it into your computer. Now it is properly installed, you will gain access and read all the memory stored on your SIM card.

How To Read Cell Phone SIM Card (5 Best-Steps Guides)

Step 1

Firstly, get a SIM reader, you can visit dekart to buy one. Plug the device into a computer using the USB port and read all the memory saved on a SIM. This includes phone book contacts, notes, text messages, and calendar dates. The device price tag is anywhere between $5 and $100 and mostly cost in the $20 to $30 range as of November 2021.

Step 2

Now remove the SIM card from your cell phone. The SIM card is usually under your phone’s battery. To do this, you have to remove the back cover of your phone and then remove the battery. You will see a small card stored in the back of your phone. Either slide it out of place or unclip the mechanism holding the card. If it is a smartphone, you have to use a needle or sim injector to remove the SIM card usually found at the side of the cell phone without removing the battery.

Step 3

Next is to insert the SIM card into the reader. Most readers allow you to slide the card into the reader. Ensure you insert the card properly. It is good to read the instructions guide of your specific SIM card reader to ensure you are using it properly.

Step 4

Plug the reader into your computer. Most readers usually come with software that you have to install on your PC before detecting the device.

Step 5

Follow the prompts message displayed on your computer to read the memory on your SIM card. Most are locked by default for security reasons and won’t be read by the SIM card reader. If this is the case, then you will have to call your service provider to get a pass-code to unlock it.